RespirTech inCourage, Instruction Manual, Page: 22 / 40

This allows the user to control when the audible beep will sound. To set the audible
beep, select BEEP CTRL from the
Setup Menu 1 screen as shown on page 21 .
The audible beep has three settings:
•
ON – Audible beep for button pushes and
alternating tones at the end of every session
step completed
•
BUTTON (BTN) – Audible beep for button
pushes only (default)
•
OFF – No audible tones will sound
The current selection for the beep setting is displayed on the top line of the display.
Press SAVE to exit the menu and to save the selected beep setting.
Quick Start and Auto Pause Session Time
This allows the user to adjust the therapy session length for the one-touch start Quick
Start and Auto Pause programs. The default 12 step, 30 minute session can be set
between 5 and 90 minutes in 5 minute increments. If the session time is less than 30
minutes, the number of 2.5 minute steps is reduced. If session time is greater than 30
minutes, the time is equally divided over 12 steps.
To adjust the Quick Start and Auto Pause
session time, select QS/AP TIME from the
Setup Menu 1 screen described on page 21.
Select BACK to return to Setup Menu 1
without saving changes.
Pause Time:
When a Pause Time is set, a session will automatically restart after a programmed
pause during an Auto Pause or Multi Step session. By default, the Pause Time is set to
OFF. A session can still be started manually at anytime by pressing RUN. When active,
a Pause Time countdown will be shown on the display.
Beep Control:
(i) SETUP MENU BEEP CTRL PRESS:
(i)
(i)
SETUP MENU
SETUP MENU
QS/AP TIME
PAUSE TIME
PRESS:
PRESS:
B E E P S E T T I N G : B U T T O N
O N B T N O F F S A V E
T O T A L T I M E : 3 0 m i n
B A C K D O W N U P S A V E
SYSTEM UTILITIES (cont’d)
22
inCourage
®
Airway Clearance Therapy | INSTRUCTION MANUAL