5-1
REM
staR
M s
ERiEs
U
sER
M
anUal
C
haptER
5: a
lERts
and
t
RoUblEshooting
This chapter describes the device alerts and also provides troubleshooting information for issues
you may run into when using the device.
5.1 d
EviCE
a
lERts
The device provides two alert levels, high and medium priority.
•
High Priority
– These alerts require immediate operator response. The alert signal consists
of a high priority sound, which is a continuous two-beep pattern (indicated in the following
table as: • • • •). Additionally, the backlights on the buttons will provide a high priority
flashing pattern consisting of a continuous, bright-to-off, two-flash pattern (indicated in the
following table as:
◊◊ ◊◊ ◊◊)
.
•
Medium Priority
– These alerts require prompt operator response. The alert signal consists of
a medium priority sound, which is a continuous one-beep pattern (indicated in the following
table as: • •). Additionally, the backlights on the buttons will provide a medium priority
flashing pattern consisting of a continuous, bright-to-dim, one-flash pattern (indicated in the
following table as:
◊ ◊ ◊)
.
