ENGLISH
14.0 CLEANING AND MAINTENANCE
The Bili
Chek®
System is made of an easy to clean smooth surface. The following cleaning agents are recommended
for use:
•
KleenaSeptic®
•
Cavicide®
•
70% - 90% Isopropyl Alcohol
•
1% Bleach
Spray cleaning agent of choice onto a damp cloth to wipe clean the Bili
Chek
System. This same procedure may also be
used for the display window.
WARNING: Do not immerse in water or other liquid. If liquids spill onto unit, wipe with a
damp cloth and let unit dry before using.
WARNING: Do not attempt to clean and/or reuse Bili
Cal
™ Individual Caibration Tip.
CAUTION: Clean the optical measurement tip (only) with 90% or higher Isopropyl Alcohol
using a soft optical surface cleaning wipe.
CHANGING THE MEASUREMENT LIGHT BULB
If the light bulb is not operating and error code E01 or E10 (refer to troubleshooting section of this manual) is displayed,
it is necessary to replace the light bulb using a manufactured approved Replacement Bulb Kit (REF B800-22).
•
Remove the battery pack from the bottom of the Bili
Chek
unit.
•
Remove the protective label.
•
Remove the lamp cap using a flat tip or Phillips head screw driver.
•
Grab the loop of the light bulb with forceps or similar tool/instrument.
•
Gently pull to remove lamp assembly.
•
Insert factory specified replacement lamp assembly.
•
Install the replacement lamp cap supplied with the bulb, do not over tighten.
•
Apply new protective label.
•
Securely attach battery pack.
•
Apply new Bili
Cal
Tip, supplied with replacement kit.
•
Turn power on.
•
Perform multiple calibrations until unit accepts calibration.
WARNING: The Bili
Chek
is to be used only with an approved Replacement Bulb Kit from the
manufacturer. Do not over tighten lamp cap.
WARNING: There are no field serviceable components which can be accessed from the
battery pack opening. Do not attempt to separate the upper and lower bodies or
remove the junction screw. Doing so could damage the fiber-optics and will
invalidate the manufacturers warranty.
22
Summary of Contents for bilichek
Page 2: ...ENGLISH ...