ENGLISH
15.0 ATTACHING THE CHARGER BASE TO A WALL
A charger base template has been provided below, to assist with mounting the charger base to the wall. The charger base,
with the Bili
Chek®
unit, and additional battery pack weight is approximately 974 g.
For wall mounting of the charger base the user should purchase the appropriate anchor for the type of wall. For example,
if the user is mounting to a sheetrock wall, hollow wall fasteners should be used. If the user is mounting to a wood wall,
wood screws should be used.
Insert the screw into the wall leaving a gap of approximately .25 cm of the screw exposed between the wall and the head
of the screw. Place the unit on the screw to check the fit and adjust as required.
WARNING: Do not mount charger base over or near any heating device, sink or basin. Do not
hang anything or place any objects other than the Bili
Chek
Hand-Held Unit and/
or battery packs in the charger base. Maximum downward force on charger base
should not exceed 2500 g.
Full Size Charger Base Template
23
Summary of Contents for bilichek
Page 2: ...ENGLISH ...
