Doffing procedure (use of Hazbag optional)
1. Lay the hazbag on the ground (*if supplied with suit), open end facing
upwards. The wearer should stand in the open end of the hazbag in
preparation for doffing (fig. 31).
2. With the wearer’s arms in an outstretched position the dressing assistant
should break the velcro seal on the outer zip flaps and fully open the gas-tight
zip across the chest (fig. 32).
3. Wearers’ should now withdraw their arms from the sleeves of the suit and
unfasten both the waist belt attached to the AFU and the chin strap of the
peak-less safety helmet (if worn). After unfastening the waist belt the wearer’s
arms should be crossed over the chest (fig. 33).
16
Fig.31
Fig.32
*Hazbag shown not
supplied with suit (see
Spares and Accessories).
