background image

22

23

Cleaning the earmould 

•   First, remove the tubing and ear-

mould  from  the  hearing  instru-
ment. Keep left and right instru-
ment separated.

•   Remove  earwax  with  the  clean-

ing  brush  and  a  soft  cloth.  If 
needed,  use  a  mild  solution  of 
soft soap and water or a special cleaning solution. Ask your 
hearing care practitioner for detailed instructions.

•   Rinse the earmould with water.

Note:  Do  not  use  water  or  other  liquid  on  the  hearing  instru-
ment itself.

•   Dry the earmould with a cloth.

•   Remove water drops from tubing 

and earmould. A special device is 
available for this from your hear-
ing care practitioner.

•   Ensure  that  the  earmould  and 

tubing are completely dry before 
attaching  them  to  the  hearing  instrument.  Make  sure  that 
you  connect  the  correct  earmoulds  to  their  correspond ing 
instruments.  Check the figures on page 11.

Replacing the tube

Ask  your  hearing  care  practitioner  to  replace  the  earmould  
tubing if it becomes stiff or changes colour.

Cleaning the sound tube and dome for ThinTube

The ThinTube

The  ThinTube  feeds  the  amplified  sound  from  the  hearing  in-
strument into the ear. 

The  ThinTube  and  the  dome  should  be  cleaned  regularly.  
Re move  the  ThinTube  from  the  instrument  before  cleaning  by 
un screwing it. Use a damp cloth to clean the ThinTube and dome 
on the outside and use the black cleaning rod to “push” any de-
bris out of the sound tube. The cleaning rod should be insert ed 
where  the  ThinTube  attaches  to  the  instrument  and  pushed 
all  the  way  through  the  ThinTube 
and out through the dome.  Do not  
submerge  or  rinse  the  ThinTube 
and dome with water, as there is a 
risk that a water drop may become  
lodged in the ThinTube. If this should 
occur, it will prevent sound coming 
through  the  ThinTube,  and  may  be 
harmful  for  the  instrument’s  elec-
tronics.

The ThinTube and dome should be changed every third month  
or  sooner  if  the  ThinTube  becomes  stiff  or  brittle.  We  recom-
mend that you have your hearing care professional change the 
dome for you. If your hearing care professional instructs you to 
change  the  domes  yourself,  make  sure  that  they  are  securely  
fastened to the ThinTube before inserting them in your ear.  

Failure  to  change  the  domes  in  accordance  with  the  instruc-
tions could result in injury.

Summary of Contents for ES70-DVI


















Reviews: