5
Installation Procedure
Page 12
Resonance Technology, Inc. CinemaVision System Installation / Operation Manual: RTC-CVSS Rev
12
5.3.
GE Auto Voice Installation
5.3.1.
The GE Auto Voice has an interface box to interface the Serene Sound Controller to the MRI signal. Remove the
cable from GE OSG J7 and connect to the Interface box “J7-In”. And connect a cable from “J7-Out” back to the GE
OSG J7 location. The CV Controller receives the signal from interface box via interlink cable which connects to the
controller back panel.
5.4.
Siemens Auto Voice Connection
5.4.1.
Remove the (LINE OUT) mini stereo audio cable from the back of the Siemens computer and plug it into the
back of the AV console marked input using a mini stereo extension cable. From the back of the controller, plug a
mini stereo cable (male-male) to output signal to plug back onto the Siemens computer marked audio out.
5.4.2.
If Auto voice command volume are low, have the Siemens engineer, adjust the sound settings on the computer.
Remove Cable from GE OSG J7 and Connect
to Interface Box
Connect from Interface Box to GE OSG J7
Connect Interface Box to back of Controller via Interlink cable
Connect Interface Box to back of Controller via
Interlink cable
Output connection from Interface Box to GE OSG J7
Summary of Contents for Serene Sound
Page 4: ......
