Wall Mounting Option Two
→
Involving Dissassembly
This approach requires removing the enclosure in order to access the mounting holes.
The plastic enclosure cover is hinged at the top, and latched at the bottom. Open
the enclosure by lifting at the two spots shown below.
The tablet is held in place with a latch on top and two latches on the bottom. Release
the tablet by pushing upward on the upper latch and tipping the tablet outward.
Unplug the USB power connector from the tablet and set the tablet aside.
After removing the tablet the wall mounting holes will be visible.
The power cable can exit the enclosure through the rectangular hole (typical) or can
be completely hidden by drilling a third (big) hole in the wall inside one of the big
round holes in the plastic. This will require fishing the wire behind the drywall to a
location with an AC power outlet. Regardless, during reassembly, be sure to use
strain relief channels for the power cable. Details on this are found on the “More
Tips” page of this document.
