background image

2

Subject to technical change. Errors excepted.

© 20191029_11205076_FlowSol_B_HE_WMZ.monen.indd

Safety advice

Please pay attention to the following safety advice 
in order to avoid danger and damage to people and 
property.

Instructions

Attention must be paid to the valid local standards, 
regulations and directives!

Information about the product
Proper usage

The pump station may only be used in the solar cir-
cuit of solar thermal systems in compliance with the  
technical data specified in these instructions. Due to 
its design the station must be mounted and operated 
as described in these instructions!

CE-Declaration of conformity

The product complies with the relevant di-
rectives and is therefore labelled with the 
CE mark. The Declaration of Conformity 
is available upon request, please contact 
RESOL.

Target group

These instructions are exclusively addressed to au-
thorised skilled personnel.
Only qualified electricians should carry out electrical 
works.
Initial installation must be effected by qualified per-
sonnel named by the manufacturer.

Contents
1 Overview .................................................... 3

Mounting the station ................................. 4

Flushing and filling the solar system........ 4

Ball valve positions .................................... 5

Draining the system .................................. 5

Non-return valves ...................................... 5

Flow rate measurement ........................... 6

Air separator ............................................. 6

9 Maintenance ............................................... 6
10  Safety devices ............................................. 6
11 Accessories ................................................ 7
12  Information about the pump ................... 7
13  Lists of spare parts  ................................... 7

Description of symbols

WARNING!

Warnings are indicated with a warn-
ing triangle!

 

Î

They contain information 
on how to avoid the danger 
described.

Signal words describe the danger that may occur, 
when it is not avoided.
•  WARNING means that injury, possibly life-threat-

ening injury, can occur.

•  ATTENTION means that damage to the appli-

ance can occur.

Note
Notes are indicated with an information 
symbol.

 

Î

Arrows indicate instruction steps that should be 
carried out.

Disposal

•  Dispose of the packaging in an environmentally 

sound manner.

•  At the end of its working life, the product must not 

be disposed of as urban waste. Old appliances must 
be disposed of by an authorised body in an envi-
ronmentally sound manner. Upon request we will 
take back your old appliances bought from us and 
guarantee an environmentally sound disposal of the 
devices.

Summary of Contents for FlowSol B HE WMZ









Reviews: