Resol DeltaTherm HT, Manual For The Specialised Craftsman

Page: 16 / 32

16
en
Installation
Commissioning
Settings
Data comm
unication
Tr
oubleshooting
5.2 Status menu
The status menu contains information about the current state of the heating cir-
cuits. Furthermore, measured and balance values as well as messages are indicated.
5.3 Heating
In the Status / HC menu, the status of the heating circuit is indicated. The status
of the heating circuit is also the home screen of the controller. In this menu, the
operating mode of the heating circuit can be changed:
Automatic: Automatic heating mode.
Day: Constant heating mode with the adjusted day correction.
Night: Constant heating mode with the adjusted night correction and the selected
correction mode.
Holiday: Constant heating mode within an adjustable time frame with the adjusted
night correction and the selected correction mode.
Off: The heating circuit is switched off. The antifreeze function of the heating circuit
remains active.
5.4 Meas. / Balance values
In the Status / Meas. / Balance menu, all current measurement values as well as a
range of balance values are displayed. Some of the menu items can be selected in
order to enter a submenu.
Each sensor and relay is indicated with the component or function it has been allo-
cated to. The symbol
▶
at the edge of the display next to a sensor allocated to a func-
tion, means that this sensor has several functions. Use the Lightwheel
®
to scroll to
these functions. The sensors and relays of the controller are listed in numerical order.
When a line with a measurement value is selected, another submenu will open.
If, for example, S1 is selected, a submenu indicating the minimum and maximum
values will open.
5.5 Messages
In the Status / Messages menu, error and warning messages which have not been
acknowledged are indicated.
During normal operation, the message Everything OK is indicated.
A short circuit (short-circuit) or line break (break) in a sensor line is indicated
as !Sensor fault.