Resol DeltaTherm HT, Manual For The Specialised Craftsman

Page: 7 / 32

7
en
Installation
Commissioning
Settings
Tr
oubleshooting
Data comm
unication
3 Operation and function
3.1 Buttons and adjustment dial
The controller is operated via 2 buttons and 1 adjustment dial (Lightwheel
®
) below
the display:
Left button (
⟲
) - escape button for changing into the previous menu / changing
to the home screen (Status Heating circuit), if the button is
pressed for 2 s
Right button (
✓
) - confirming / selecting
Lightwheel
®
- scrolling upwards / scrolling downwards, increasing adjustment
values / reducing adjustment values
3.2 Microbutton for chimney sweeper function / screed drying and
holiday mode
The controller is equipped with two microbuttons for quick access to the holiday
mode and the chimney sweeper function / screed drying. The microbuttons are lo-
cated underneath the slidable housing cover, the slider.
Microbutton
♦
: The chimney sweeper or screed drying function can be triggered
with the microbutton
♦
. The chimney sweeper function is acti-
vated by default. In order to activate the screed drying function,
the chimney sweeper function must be deactivated (see page
20). In order to trigger the chimney sweeper or screed drying
function, press and hold down the microbutton
♦
for 5 s.
Microbutton
⛁
: The microbutton
⛁
is used for activating the holiday mode. If the
microbutton is pressed and held down for approx. 3 s, the adjust-
ment channel Days of absence appears, allowing to enter the
number of days for an absence. If the parameter is set to a value
higher than 0, the holiday mode becomes active and the days will
be counted backwards at 00:00. If the value is set to 0, the holiday
mode is deactivated.
3.3 Control lamp
The controller is equipped with a multicolour LED in the centre of the Lightwheel
®
,
indicating the following states:
Colour Permanently shown Flashing
Green
Everything OK Manual mode on
Red
Screed drying
cancelled Sensor line break, sensor short circuit, initialisation
Yellow
Holiday mode active Chimney sweeper function / screed drying active
Red /
Green
Manual mode off