en
36
Installation
Indications,
functions and options
Messages
Commissioning
Operation and function
3.2 Menu structure
Adjustment level
DT O
DT F
DT S
S SET
S MAX
SMAXS
…
Menu level
ARR
LOAD
COL
…
Status level
TCOL
TCOL2
TSTB
TSTT
…
The menu structure of the controller consists of 3 levels: the status level, the menu
level and the adjustment level.
The status level consists of different display channels which indicate display values
and messages.
The menu level consists of several menu items, each of which consists of sub-men-
us and adjustment channels. Each of these menu items represents a function or
option which can be selected. If a function or option is selected, the controller
changes to the adjustment level in which the corresponding parameters of the
function or option are available.
In order to activate or deactivate a function, it must be selected in the menu level.
The display changes to the adjustment menu in which all adjustments required can
be carried out.
During normal operation of the controller, the display is in the status level.
Menu level
If it is possible to jump into a menu, PUSH is indicated below the menu item. Use
button
➄
to access the menu. In order to leave the menu, press button
➆
.
If an option is deactivated, it will appear in the menu level with the addition OFF.
Note:
Some of the menu items depend on the selected system and the adjusted
options. Therefore, they are only displayed if they are available.
Note:
The abstract from the menu structure is for information on the structure
of the controller menu and is therefore not complete.
3.3 Selecting menu points and adjusting values
During normal operation of the controller, the display is in the status level.
In order to leave the status level and access the menu level, press button
➅
.
The display indicates the level with the selectable menus. In order to change the
parameters of a menu item, select the menu item and press button
➄
. The display
changes to the adjustment level. The adjustment channels are characterised by the
indication
Ⓢ
.
Î
Select the desired channel by pressing the buttons
❶
and
❸
.
Î
Confi rm the selection with button
➄
,
Ⓢ
fl ashes (adjustment mode).
Î
Adjust the value, the function or the option using the buttons
❷
and
❹
.
Î
Confi rm the selection with button
➄
,
Ⓢ
permanently appears, the adjust-
ment has been saved.
If no button has been pressed within a couple of minutes, the adjustment is can-
celled and the previous value is retained.
4 System- Monitoring-Display
System-Monitoring-Display
The System-Monitoring-Display consists of
3 blocks: channel display, tool bar and system
screen.
Channel display
The channel display consists of 2 lines. The up-
per display line is an alphanumeric 16-segment
display. In this line, mainly channel names and
menu items are displayed. In the lower 7-seg-
ment display, values are displayed.
Tool bar
The additional symbols in the tool bar indicate
the current system state.