manualshive.com logo in svg

ResMed Nox A1, How To Use Manual

Share
Download
ResMed Nox A1 How To Use Manual Download Page 27

27

•  

Check signals with an Android tablet 

The app is available on Google Play. Find it by searching Noxturnal or by flashing the QR code at the right. 

The Noxturnal app allows you to:

 

- Completely configure a recording (also possible via Noxturnal PC software with the USB cable)
- View sensor status and perform impedance checks in real time
- Perform biocalibration
- View live signals
- Check Nox A1 status and parameters (battery status, device profile, start time, etc.) 

How to use:

Turn on the Nox A1 and open the app. Check that the app is in Ambulatory Mode (if needed, change the app mode in the  
settings  ). A list of all devices previously connected to the tablet will be displayed.

Find your device on the list of available devices (check the serial number to ensure it is the right device) and click on it to select. 

Check signals

Click here if your device doesn’t appear in the list.

Summary of Contents for Nox A1































































Reviews:

No comments

Brands by name

Popular brands

Load more brands