2
1.
Place the device on a stable level surface.
2.
Remove the side cover from the device by pressing the clip of the side cover and pulling it
away from the device.
3.
Open the humidifer and fill it with water up to the maximum water level mark.
Do not fill the humidifier with hot water.
4.
Close the humidifier and insert it into the side of the device.
Your device is now ready to be used with humidification. See
Humidity Level
to change
your settings.
For more information on how to setup your device, turn on therapy or change settings refer to
your device user guide.
Recommended water type
(France only)
The following water types are recommended for use in the humidifier:
Boiled tap water, cooled to room temperature
Distilled water
Bottled water (with a low mineral content).
Note
: Do not use non-sterile demineralised water for domestic use.
Humidity Level
The humidifier moistens the air and is designed to make therapy more comfortable. If you are
getting a dry nose or mouth, turn up the humidity. If you are getting any moisture in your mask,
turn down the humidity.
You can set the Humidity Level to Off or between 1 and 8, where 1 is the lowest humidity
setting and 8 is the highest humidity setting.
Summary of Contents for HumidAir
Page 1: ...User guide English...
