Setting up
1.
Connect the DC plug of the power supply unit to the rear of the device.
2.
Connect the power cord to the power supply unit.
3.
Plug the other end of the power cord into the power outlet.
4.
Connect one end of the air tubing firmly onto the air outlet.
5.
Connect the assembled mask system to the free end of the air tubing.
Notes:
•
Always ensure that the AutoSet CS-A is placed in an area where the alarm LED indicators are clearly
visible.
•
For more information on assembling your mask see your mask user guide.
•
Recommended masks are available on www.resmed.com on the Products page under Service &
Support.
AutoSet CS-A basics
Info menu*
Allows you to view your sleep
statistics or exit from the menu.
Setup menu*
Allows you to make changes to
settings or exit from the menu.
Start/Stop button
Starts or stops
treatment.
LCD screen
Displays the menus, treatment
screens and reminders.
Push dial
Turning the dial allows you to scroll through
the menu and change settings. Pushing the
dial allows you to enter into a menu and
confirm your choice.
Alarm mute
Press once to mute
alarms. Press a
second time to
unmute.
Alarm and therapy LEDs
Yellow—flashes during an alarm.
Blue—on during therapy (if enabled
by clinician).
Key:
Home
Humidity Level
Ramp
Heated Tube
Climate Control
Start/Stop
Push dial
Alarm mute
Setup menu
Info menu
2
