English
5
Starting therapy
1.
Fit your mask.
2.
Press Start/Stop or breathe normally if SmartStart
™
is enabled.
You will know that therapy is on when the
Sleep Report
screen is displayed.
The pressure bar shows the inspiratory and expiratory pressures in green. The
green bar will expand and contract as you breathe in and out.
The screen will go black automatically after a short period of time. You can press Home or the dial to
turn it back on. If power is interrupted during therapy, the device will automatically restart therapy
when power is restored.
The AirCurve 10 device has a light sensor that adjusts the screen brightness based on the light in
the room.
Stopping therapy
1.
Remove your mask.
2.
Press Start/Stop or if SmartStart is enabled, therapy will stop automatically after a few seconds.
The
Sleep Report
now gives you a summary of your therapy session.
Usage hours
–Indicates the number of hours of therapy you received last
session.
Mask Seal
–Indicates how well your mask sealed:
Good mask seal.
Needs adjusting, see Mask Fit.
Humidifier
–Indicates if your humidifier is working properly:
Humidifier working.
Humidifier might be faulty, contact your care provider.
If set by your care provider, you will also see:
Events per hour
–Indicates the number of apneas and hypopneas experienced per hour.
More Info
–Turn the dial to scroll down to view more detailed usage data.
