DCN: 141-00940-09 11/02/07
19
Wiring to the X10 Powerline Interface Module
The X10 interface on the Control Unit is the RJ11 jack, J4. It is connected to an X10 power line interface
module, Model PSC05 or TW523, by the
four (4) wire
modular phone cable provided.
IMPORTANT NOTE:
Use the Modular Cable Provided.
If you do not, be sure the cable is the correct
type. The Cable must be 4 wire (NOT 2), and reversing.
If you are having X10 communication problems or in doubt about the cable, check the cable with the simple
inspection shown below.
RJ11
JACK
X10 PLI
X10 PLI
MODULE
4 WIRE MODULAR CABLE
Place the ends of the cable
side by side and verify the
color codes of the
conductors are in
reverse
order as shown here.
B R G Y
B R G Y
INCORRECT CABLE WIRING
DO NOT USE THIS CABLE
TXB16 CONTROL UNIT
J4
120V OUTLET
B R G Y
Y G R B
CORRECT CABLE WIRING
