esatto.house
07
Installation Instructions
PAGE 07
It’s important to carefully read the following installation instructions before beginning the installation of your cooktop.
IMPORTANT!
The connection of this cooktop must be carried out by a suitably qualified and licensed person, in
accordance with the current version of the following:
► AS/NZS 3000: 2007 Wiring Regulations
► 2010 Electricity Safety Regulations
► The installation instructions within this user manual
INSTALLATION INSTRUCTIONS
Cut out the work surface according to the sizes shown in the drawing. For the purpose of installation and use,
a minimum of 50mm space shall be preserved around the hole.
Be sure the thickness of the work surface is at least 30mm. Please select heat-resistant work surface material
to avoid larger deformation caused by the heat radiation from the hotplate. As shown below:
L(mm)
W (mm)
H(mm)
D(mm)
A (mm)
B (mm)
X(mm)
700
520
55
51
560
490
50 mini
Under any circumstances, make sure the ceramic cooker hob is well ventilated and the air inlet and outlet
are not blocked. Ensure the ceramic cooker hob is in good work state. As shown below:
Note: The safety distance between the hotplate and the cupboard above
the hotplate should be at least 760mm.
USER MANUAL
PAGE 06
SPECIFICATIONS
MODEL
PR
560mm × 490mm
MODEL
BURNERS
OTHER
2
× 1.80 kW radiant zones (Ø 190mm)
2 × 1.20 kW radiant zones (Ø 155mm)
Touch control operation
4
×
Individual residual heat indicators
Framless design
CERAMIC COOKTOP SURFACE LAYOUT
1
2
3
4
YOUR INALTO COOKTOP
TOUCH CONTROLS
700mm × 520mm × 55mm
EE70T
EE70T
700
55
490
560
1
2
3
4
1.80kW zone (Ø 190mm)
1.20kW zone (Ø 155mm)
1.80kW zone (Ø 190mm)
1.20kW zone (Ø 155mm)
AS/NZS 3000 Wiring Rules
650mm
A
B
C
D
E
650mm
50mm
20mm
AIR
INTAKE
AIR EXIT
5mm
