background image

User Manual

 18

Troubleshooting

Tips & Hints

Please read the issues below carefully and try all relevant steps.
If none of this helps, please contact us on 1300 11 4357 for further advice 
or to schedule a technician to inspect your cooktop.

THE COOKING ZONES   

ARE NOT FUNCTIONING

Please check... 

That your cooktop is plugged in and there is 
power to the wall socket.

Hint: Check the mains power or the isolation 
switch.

If your cooktop has a Control Lock or Child 
Lock function, check that it is switched off.

THE RESIDUAL HEAT INDICATOR 

DOES NOT APPEAR 

Please note... 

If the cooking zone has only been turned  
on for less than 30 seconds, the residual heat 
indicator will not appear.

If the cooking zone does appear to be  
hotter than 50° C or has been activated for 
longer than 30 seconds, and the residual heat 
indicator has not come on, please contact our 
Support Team on 1300 11 4357 for advice.

THE COOKTOP IS HUMMING 

WHEN A ZONE IS SELECTED

Please note... 

This is normal—the sound will disappear 
when the zone heats up.

If the humming sound continues once  
the zone is fully at heat, please contact our 
Support Team on 1300 11 4357 for advice.

THE COOKING ZONES HAVE 

BECOME DISCOLOURED

 

Please note... 

This maybe caused by burnt on remnants of 
food. This will not affect the working of the 
appliance however you should make sure that 
the cleaning instructions are being followed 
regularly.

THE COOKTOP IS DIRTY   

AFTER COOKING

 

Please note... 

Once it has cooled down, your cooktop 
should be cleaned after every use. Any 
residues that are left on the cooktop surface 
from cleaning agents will damage it. You 
should remove any residues with warm water 
mixed with a little washing up liquid.

Hint: For physical deposits on the surface, 
a specialist ceramic cooktop cleaner/
conditioner should be purchased. Please 
follow the instructions with this product.

THERE IS A METALLIC SHEEN   

ON THE GLASS

 

Please note... 

This is often caused by pots with aluminium 
or copper bases. 

Hint: Specialist ceramic cleaner should 
remove the marks. Your cooktop should  
be cleaned regularly, as spills that are allowed 
to burn into the surface may  
react with the ceramic glass and become 
much harder to remove.

THE ELEMENTS STAY ON HIGH 

 

Please... 

Contact our Support Team on 1300 11 4357 to 
arrange for a technician to visit.

THE GLASS IS SCRATCHED 

 

Please note... 

Scratches are often caused by using cookware 
with rough-edges. Please ensure pots and 
pans have smooth bases.

THE COOKTOP IS 

NOT TURNING OFF

 

Please... 

Ensure the child lock is disabled.

Hint: On some models you may have to touch 
the zone control twice to disable.

Please note that if an engineer is asked to attend whilst the product is under warranty and finds that the problem  

is not the result of an appliance fault, then you may be liable for the cost of the call out charge.

Summary of Contents for Esatto EE70T

























Reviews: