User Manual
12
Do not use cookware with jagged edges or a curved base.
TO START COOKING
USER MANUAL
PAGE 12
After power on, the buzzer beeps once, all the indicators light up for 1 second
then go out, indicating that the ceramic hob has entered the state of standby
mode.
1. Touch the ON/OFF
control. all the indicators show “-“.
2. Place a suitable pan on the cooking zone that you wish to use.
Make sure the bottom of the pan and the surface of the cooking
zone are clean and dry.
►
►
3. Select a heat setting by touching the “-“ or “+” control.
If you don’t choose a heat setting within 1 minute, the Induction hob will
automatically switch off.
You will need to start again at step 1.
You can modify the heat setting at any time during cooking.
Turn the cooking zone off by scrolling down to
“
0
”
or
touching “-” and “+” control together.
Make sure the display shows
“
0
”
Turn the whole cooktop off by touching the ON/OFF control.
►
►
WHEN YOU HAVE FINISHED COOKING
►
►
RESIDUAL HEAT INDICATORS
► After a zone is switched off, the corresponding cooking zone will show an “H” in the control panel. This means that
the temperature of the zone still high enough to cause injury.
► The residual heat indicator will go out when the surface has cooled down to a safe temperature.
IMPORTANT!
The residual heat indicator will disappear if the mains supply to the product is cut.
Warning!
It is still possible to burn yourself on a cooktop zone, even when the residual heat indicator has gone
off. Always use caution when using the cooktop.
► The residual heat also can be used as an energy saving function if you want to heat further pans,use the hotplate
that is still hot.
You can lock the controls to prevent unintended use (for example children accidentally turning the
cooking zones on).
When the controls are locked, all the controls except the ON/OFF control are disabled.
Touch the keylock
control. The timer indicator will show “Lo “
Make sure the ceramic hob is turned on.
Touch and hold the keylock control
for a while.
You can now start using your ceramic hob.
When the hob is in the lock mode, all the controls are disable except the ON/OFF
,
you can always turn the ceramic hob off with the ON/OFF control in an emergency,
but you shall unlock the hob first in the next operation
When the hob has been operating for some time, there will be some residual
heat. The “ H ”appears to warn you to keep away from it.
safety feature of the hob is auto shut down. This occurs whenever you forget to switch off a cooking zone.
The default shutdown times are shown in the table below:
Power level
1
2
3
4
5
6
7
8
9
Default working timer (hour)
8
8
8
4
4
4
2
2
2
LOCKING THE CONTROLS
►
►
TO LOCK THE CONTROLS
TO UNLOCK THE CONTROLS
►
►
►
►
AUTO SHUTDOWN
PAGE 13