\
09
\
Installation
Instructions
\
Installing the rangehood
Put the rangehood in the cabint.
Pull out the clip until it can reach the cabint.
Screw the clip tighten.
Noted:
1/ These steps should be operated by 2 persons.
2/ After clip screwed, it can not be too near by the cutting edge. Or it
may cause the fall risk.
The hanging clip is used for clipping the rangehood on cabinet. Release the
screws on the hanging clip before installation.
–
–
Pull out
Pull out
Screw until tighten
Release the screws
Warning: Failure to install the screws or fixing device in accordance
with these instructions may result in electrical hazards.
The warning shall be in the same part of the instructions that include
details of how to mount the equipment.