Strut Jack Operation
Strut Jack Setup:
To extend a strut: Make sure that the jack is cranked all the way in.
(1)
Slide the base bracket over the red strut and slide it down until the bracket
is resting on the baseplate ears. Check that the spring(s) on the yellow strut
pins in the red strut are not going to be obstructed by the jack body.
(2)
Install the safety pin in the base bracket
1
The strut jack may also be used with a spike foot
instead of a baseplate on the bottom of the strut.
Remove the baseplate, insert the spike
foot (the white and blue sections will
have to be extended at least one hole
to do this), and insert the steel base
pin through the spike foot hole in the
jack base bracket, the bottom hole on
the red strut section, and the inserted
spike foot.
2
