Strut Jack Operation
Strut Jack Operation:
If you are extending the white tube you must take great
care not to extend the white section past the interlock
(indicated by the orange safety bar appearing). This
interlock may be damaged if the strut is extended too far.
You should observe the small holes on the top sides of
the red tube to observe the interlock button when it snaps
into one of the holes at full extension.
When you have extended the strut to the desired length, reinsert a yellow strut
pin into the top red tube hole, crank the jack down slightly until the pressure is
released on the pin in the jack head and remove it. If you need to continue
extending the strut, simply crank the jack back down, pin the jack head to
another hole, and repeat the process.
