Rescea RVH-AXP35-LCD, User Manual

Page: 9 / 20

b. RVH-AXP35-VF
With camera LCD closed, set camera (Camera Tray attached) into position as
shown below lining up the Camera Tray Posts with the grooves on the Camera
Tray. Once aligned slowly push forward into the housing until it stops.
Fully extend camera's viewfinder as shown above.
※
When installing camera take care that camera's Grip Belt does not cause an obstruction.
※
With RVH-AXP35-VF be sure to extend camera's viewfinder. If this is not done the camera
will not be turned ON when using the Remote Commander. Camera will remain ON until
the Power Button is used to turn camera OFF, or until Power Save setting engages.
5. Using the SONY RM-VPR1 Remote Commander Cable provided, connect camera
to the remote via the Multi/Micro USB Terminal and RM-VPR1 Remote Cable
Terminal as shown below.
8