2
Parameters:
Automatical Lead Acid battery charger.
Producer: YZPOWER
Technical parameters of the charger model (number of cells in series, input, output,
battery voltage, dimensions, weight etc.) are indicated on the charger label or
available on the seller´s e-shop.
General safety instructions:
In case of damage to property, the device or human health caused by
the device not being used in accordance with the user manual, the user
not only loses the right to warranty but also in these cases the
manufacturer disclaims liability for damage to property and human
health!
This product is not a toy and it is not intended for children.
Unplug the charger from the source of electricity when you do not use it.
This product does not need to be repaired or adjusted, so please do not
disassemble this charger. There is an increased risk of electric shock if the wire is
touched.
Please check the insulation of this device as well as the cable for connection to the
power supply.
Avoid the risk of short-circuiting of connectors or the device. Short-circuiting may
cause fire or electric shock.
Never connect this charger to unapproved 230V mains or mains voltage other
than specified.
The supply of fresh air is important during charging, the ventilation openings on
the sides of the device must remain free.
Do not place this charger on a carpet. Place it on a firm, flat, non-flammable and
stable surface.
If you bring the charger from a cold to warm environment, you must first wait for
the temperature of the device and the room to equalize. The resulting condensed
water could damage the charger.
If you connect other devices to this charger, you also need to follow the safety
instructions of such devices.
Do not apply high mechanical pressure to the device.
Do not expose this charger to extreme temperatures, direct sunlight, strong
vibrations or humidity.
Do not use or store this charger near an open flame, heaters or other source of
high temperatures.
