Repotec RP-WR5822, User Manual

Page: 177 / 336

802.11ac WLAN Router User’s Manual
Field Description
WPA2 Cipher
Suite Configure the WPA2 Cipher Suite to AES
Pre-Shared Key
Format Configure the Pre-Shared Key Format to Passphrase or HEX (64
characters)
Pre-Shared Key Type the Pre-Shared Key
Enable Pre-
Authentication According to some of the preferred embodiments, a method for
proactively establishing a security association between a mobile node
in a visiting network and an authentication agent in another network to
which the mobile node can move includes: negotiating pre-
authentication using a flag in a message header that indicates whether
the communication is for establishing a pre-authentication security
association; and one of the mobile node and the authentication agent
initiating pre-authentication by transmitting a message with the flag set
in its message header, and the other of the mobile node and the
authentication agent responding with the flag set in its message header
only if it supports the pre-authentication. Enable/disable pre-
authentication support. Default: disable.
Authentication
RADIUS Server Port: Type the port number of RADIUS Server
IP address: Type the IP address of RADIUS Server
Password: Type the Password of RADIUS Server
WEP + Encryption Key
WEP aims to provide security by encrypting data over radio
waves so that it is protected as it is transmitted from one end
point to another. However, it has been found that WEP is not as
secure as once believed.
1. From the Encryption drop-down list, select WEP setting.
From the Key Length drop-down list, select 64-bit or 128-bit setting.
From the Key Format drop-down list, select ASCII (5 characters), Hex (10 characters), ASCII (13
characters) or Hex (26 characters) setting.
Enter the Encryption Key value depending on selected ASCII or Hexadecimal.
Click Apply Changes button.
177