Repotec RP-UPH103R, User Manual

Page: 19 / 29

5.4 Operation Procedure for LED Model
Please follow the instructions below for UPS operation.
1. Once the AC source is connected, Line LED shall light up immediately to
indicate ready to switch on the inverter. In case this LED blinks, it means
the main AC source is out of tolerance.
2. Press both of the Control Key and
the ON/TEST/MUTE key
simultaneously for 3 seconds, the
UPS will start up after two beeps
and Inverter LED lights up to
indicate the UPS is powered
through inverter.
18