Repotec CyberBank G User Manual Download

Page: 55 / 55

CyberBank G 3.5” SATA Giga LAN Disk Enclosure

５３

drivers to the latest from the manufacturer. If your network card has the option of changing

the transmission and receive the buffers to both 128 (in the card's properties in device

manager), please try doing that. If you have an nForce chipset, try updating your Nvidia

nForce drivers to the latest Unified Drivers from Nvidia's website. Please also make sure that

you are using 100mb switch as well.

Does the LAN Disk perform or provide the Data Recovery Services?

The LAN Disk does not perform any data recovery services. If you are unable to access data

on your LAN Disk due to a defective Hard Drive, you may wish to contact an independent,

data recovery service provider. If the Hard Drive is still functioning, there is Data Recovery

software out there that can get your data back.

I click on my files and get "Access Denied." What should I do?

If you are using the Windows XP Professional:

Open up

My Computer > Tools > Folder options

View tab

and at the bottom enable the

Use simple file Sharing box

. Then please go to the instructions below:

If you are using Windows XP Home (plug in via USB):

Restart your computer and hold F8 during bootup to go into the Safe mode. Once in the Safe

mode, please go to the instructions below:

Windows 2000/XP computers, please follow the instructions:

Open up

My Computer

and right-click on the NetDisk drive. Select the

Properties >

Security tab

and click the

Advance

button. If the

Everyone

group is not in there, please add

the group and give it Full Control permissions.

Then click on the

Owner

tab and at the bottom you should be able to change the owner to

Administrators instead of what it is already. If it asks you to replace permissions on all

subdirectories, click

YES

. Then you should be able to access contents. This is related to the

Operating System's security features.

My NetDisk shows up as a Black dot when used with USB.

When use the LAN Disk via the USB mode, the software is not needed, therefore you see a

black dot (Offline) in the system tray as that is an indicator for NDAS (Ethernet) mode.

P/N: M-709HEU362

Summary of Contents for CyberBank G
























































Search results

Summary of Contents for CyberBank G

Reviews:

Related manuals for CyberBank G

Brands by name

Popular brands

Repotec CyberBank G, User Manual

Search results

Summary of Contents for CyberBank G

Reviews:

Related manuals for CyberBank G

Brands by name

Popular brands