background image

REPOSE  R300 User Guide 

Page 4 of  15 

9.  If you begin to feel sick or the massage feels painful, stop use immediately. 
10. Do not go to sleep while using the massage lounger. 
11. Do not use the massage lounger after drinking alcohol. 
12. Do not sit on the backrest while the lounger is reclined. 
13. Do not sit on the massage lounger with your legs resting on the backrest. 
14. Do not sit on the leg rest, the lounger may fall over. 
 

OPERATING PRECAUTIONS 

 

WARNING

 – To reduce the risk of fire, burns, electric shock, damaging the lounger, or 

personal injury, please read the following: 

 

1.  Make sure the power plug is completely inserted into the wall power outlet. 
2.  Never leave the massage lounger unattended when the power cord is plugged in. 
3.  Always unplug the massage lounger when not in use. 
4.  Only use the massage lounger for the purpose described in these instructions. 
5.  Continuous supervision is required when the massage lounger is used by people 

who have limited mobility or communication abilities. 

6.  Do not stand on any part of the massage lounger. 
7.  Do not use any accessories other than those recommended by Repose Corporation. 
8.  This massage lounger is not to be used by children or anyone under the age of 16. 

Please keep children away while the massage lounger is in use. 

9.  Make sure there are no obstacles behind the lounger before reclining the backrest. 
10. Make sure there are no obstacles in front of the lounger before use. 
11. When finished using the massage lounger, always return the seat to the upright 

position and lower the leg rest completely. Make sure people or objects are not in the 
way when lowering the leg rest. 

12. Never operate the massage lounger if the power cord or power plug is damaged. 
13. If you feel the massage lounger needs repair, follow the troubleshooting steps on 

page 19. Contact Repose Corp. if you need more assistance.  

14. Contact Repose Corp. immediately if the massage lounger has been dropped, 

damaged, or if it has been immersed in water. 

15. Before use, always lift the cushions and check the fabric for tearing or signs of 

abnormal wear.  

16. Check all other areas for tearing or signs of abnormal wear. If you find a tear or rip, 

immediately stop using the massage lounger and unplug the power cord. Contact 
Repose Corp. for assistance. 

17. Keep power cords away from heated surfaces. 
18. Do not allow sharp objects, metal objects, rubbish or moisture to come into contact 

with the power plug. 

19. Do not use the massage lounger over heating appliances or electric carpets. 
20. Make sure all air openings on the massage lounger are kept free and clear. 
21. Do not drop or insert anything into any of the openings of the massage lounger. 

Summary of Contents for R300


















Reviews: