REPOSE R300 User Guide
Page 13 of 14
To lower the leg rest:
1. Be sure the area below the leg rest is free of obstacles.
2. Press and hold the lower leg rest button. When the leg rest reaches the
lowest position, it will stop. If you are finished with your massage, pressing
the power button will rest the lounger and lower the leg rest.
After using your massage lounger:
1. Press the Stop button on the control panel.
2. To reset the lounger, press the power button. This will raise the backrest
and lower the leg rest.
3. Be sure to unplug the power cord if the lounger is not going to be used
again.
Automatic Massage
You can enjoy a complete massage by pressing the Auto button on the control
panel. In this mode, your entire body is massaged using every massage mode.
To enjoy an automatic massage on a specific area, press the corresponding
button. For example, to automatically massage your shoulders, press the
Shoulder button.
In addition to the automatic mode, you can select to massage a specific area of
the body such as the Neck, Shoulders, Back, Waist, and Legs.
Manual Massage
To manually massage a specific area, press the button for the area that you want
massaged. For example, press the Neck button for your neck. You can also
select a combination of modes including the Leg mode.
You can then select the massage mode by pressing the Roll, Knead, Knock, or
Vibe buttons.
Speed
The speed of the massage action is variable only during manual massages. You
can adjust the speed in three increments. The default setting is medium. The
speed of the Roll mode can not be adjusted.
Width
During the Knock and Roll massage modes, the width of the rollers can be
adjusted by pressing the Width button.
Summary of Contents for R300
Page 1: ......
