manualshive.com logo in svg

Repose Lynton, User Manual

Share
Download
Repose Lynton User Manual Download Page 25

48

49

Back Cushion Range  

There are two main back options (1) and (2). Both of these options can be adapted respectively (3) 
and (4) below. All cushions are interchangeable:

3. Adjustable Waterfall back 

1. Waterfall back

4. Adjustable lateral back

2. Support lateral back

In addition, you can adapt both the waterfall and support lateral back cushions with the addition of a 
large profile headrest (see page 20 accessories).

Seat Cushion Range

VERY HIGH

Alternating
air cushion

Reflex foam

Pressure Risk

Dynaform

For those at very high risk of developing pressure 
sores or a history of sores where the highest 
priority is to prevent further pressure damage.

The Dynaform cushion is a dynamic alternating 
air cushion, which constantly changes the air 
levels within its air cells to recreate the effect 
of normal body movements, which provides 
constant pressure redistribution to prevent 
pressure build up.

Minimum weight of user 40 Kg (6 stone 4lbs) 

Maximum weight of user 121 Kg (19 stone) 

For those who have good posture and mobility 
but are seated for greater than one hour at a  
time and require pressure relief and supported 
comfort.

This cushion has a high-density foam base which 
offers a supportive and firm seat base with a top 
layer of memory foam to allow immersion into 
the cushion, giving stability and a large surface 
area to reduce pressure levels.

For those who have good posture and mobility 
but sit for long periods of time and require 
pressure relief and supported comfort. 
Recommended for people with limited muscle 
bulk or at risk of excessive weight loss.

This cushion has a high-density foam which 
offers a supportive and firm seat base. The foam 
is topped with a fluid liquid gel in a soft silicone 
cover which provides a high level of pressure 
relief. The liquid gel helps to dissipate heat and 
constantly adapts to the user’s movement.

There are four interchangeable seat cushion options depending on your postural and comfort 
requirements. They all have a pressure management range which is shown on the images 
below. For further details on the options please consult your supplier.

Our softest foam cushion with high quality  
Reflex foam filler for gentle comfort.

For ease of cleaning and replacement all seat 
cushions and covers are removable.

Reflex foam

Pressure Risk

Easiform

VERY LOW

Summary of Contents for Lynton



























Reviews:

No comments

Brands by name

Popular brands

Load more brands