manualshive.com logo in svg

Repose Lynton, User Manual

Share
Download
Repose Lynton User Manual Download Page 17

32

33

Backrest Installation /  

Seat Depth Adjustment 

For ease of transport the back frame can be separated from the seat base.  The back frame attaches 
to the seat base by inserting the L shaped housing pins (red pin in Steps 2 and 3)) on the seat frame 
into either of the bracket sets (highlighted in blue or green) on the side of the chair back frame (see 
below).  

By selecting which bracket set you use you will also be selecting the seat depth:

•  Blue housing brackets for 457mm (18'') seat depth.

•  Green housing brackets for 508mm (20'') seat depth.

The seat depth is very important as it should be long enough to support the upper part of the legs 
whilst allowing the user’s back to rest comfortably on the backrest. 

Firstly, lie the back on top of the base with the 
top facing forward.

Lift the back and position the brackets over the 
housing pins remembering that 

you should 

be using the same positioned bracket on 
either side of the back frame (blue or 
green).

Slide the brackets onto the housing pins and 
gently apply pressure to the top of the back 
and push down to ensure it is securely in place 
– when you hear a click it’s in place.

To release the brackets pull the tab away from 
the chair.

Step 1

Step 3

Step 2

Step 4

Wing Installation 

The Lynton comes with detachable wings.  They are easy to fit and requires no tools:

Seat depth adjustment pads

There is also the option of purchasing seat adjuster 
pads which can further reduce the seat depth by 
either 25mm (1'') or 50mm (2'') depending on 
which pads are chosen.  They simply fit behind the 
back cushions using the Velcro strips, as the image 
demonstrates.

Step 1

Step 2

To attach the wings, lift the fabric flap attached 
to the back of the chair (by Velcro) to expose 
the screw holes (see step 2).

Holding onto the wing (Grey) with one hand 
screw the thumb screws (Red) to attach the 
wing.

Repeat for the other side.  Reset the fabric flap.  
To remove the wings reverse these steps.

Summary of Contents for Lynton



























Reviews:

No comments

Brands by name

Popular brands

Load more brands