73 400-12355-000 Rev. 03
KR2
i
/ KMP
i
TFF Systems
KF Comm Software
d.
One More Data Point: Allows the user to take a data point that was not part of the data
collection intervals
e.
Start Collection: Starts collecting data. Please note that during data collection, KF Comm is
unable to record data if the user is actively navigating through the Add-ins tab and its menus
(other than the Pump Control) or if the user is inside a cell in Excel. SpectrumLabs.com
recommends that the data collection computer be designated for data collection only when
running a process. Concurrent activities on the computer may interrupt or disable KF
Comm's ability to collect data properly
f.
Hardware Settings: Access and change the TFF system's basic hardware setting
g.
Workbook License: Calls up a dialog with licensing information
h.
About KF Comm: Calls up a dialog with basic KF Comm information
11.6
Worksheets Overview
a.
Integrity Test: Collect data with this worksheet during integrity testing to ensure membrane
integrity
b.
Module Characteristics: Collect data with this worksheet when analyzing initial water flux
c.
Header: Contains information that is used to populate the Header of the Trial Data
worksheet; fill out information in either the Header worksheet or the Header section of the
Trial Data worksheet
d.
Trial Data: Collect data with this worksheet when running application
e.
Graph Worksheets: There are a number of other worksheets in the workbook template that
are automatically populated with information from the three data collection worksheets.
These graphs are:
i.
NWP
ii.
Pressures and CF vs Time
iii.
Pressures and CF vs VT
iv.
Flux Rate vs Time
v.
Flux vs CF
vi.
Feed Flow Rate vs Time
vii.
DV/Cond vs Time
viii.
UV vs Time
