63 400-12355-000 Rev. 03
KR2
i
/ KMP
i
TFF Systems
Auxiliary Component Setup and Operation
Single-use Conductivity/Temperature Flowpath Components
Combination Conductivity and Temperature in-line flowpath sensors; made of Polysulfone and in
assorted hosebarb sizes.
Optional: UV Photometer
Available in either 260 nm or 280 nm models; consists of 2 fiber optic cables, 2 optical couplers to
connect to flow cell, and power supply.
NOTE:
UV Photometer cannot be remotely tared; to tare UV Photometer, press “TARE” button on
Photometer body.
Optional: Single-use UV Flowpath Components
UV in-line flowpath sensors; made of Polysulfone and in assorted hosebarb sizes.
10.4.2
Installation
Basic Setup
NOTE:
Prior to assembling KONDUiT, ensure that TFF System has been properly set-up (see
Section 7 of KR2i / KMPi TFF Systems Product Information and Operating Instructions for TFF
System setup details).
1.
With TFF System powered on, connect KONDU
i
T Communication Cable to “Auxiliary”
Octopus Cable (on KR2
i
) OR to a null modem cable that is then connected to “Valve 2”
Octopus Cable (on KMP
i
)
2.
Connect KONDU
i
T Power Cable to KONDU
i
T Power Port
Figure 1: Back of KONDU
i
T, green power light on the On/Off button
indicates if KONDU
i
T is receiving power.
Figure 2: Front of KF KONDU
i
T
