KrosFlo® Systems
User Guide
23 repligen.com IF.UG.028 R1
KrosFlo® Systems continually log collected data. Reports may be generated from this logged data as
follows:
1.
Click on the “WEB” icon under the ‘Reports List’. This will open the graphic shown above.
2.
Enter the start time for the report in the
Start
field.
3.
End the end time for the report in the
End
field.
4.
Click
Refresh
to show the logged data collected over the specified time range displayed on
the screen.
5.
Click
to generate a portable document format (.PDF) of the report. This file will be
opened when the report generation is done.
6.
Click
MAIN
to return to the Main screen.
Select
Batch Report
and enter a general time frame to display Batch details for that time period.
Select
Time Report
and enter a general time frame to display system details for that time period.
10.
Safety
A Production Stop button is located on the control panel enclosure. Pressing the Production Stop
button in will stop all operation immediately and prevent all components from operation. System
operation can be restored by pulling the Production Stop out, pressing the Blue reset button, and
then navigating to Alarms screen to Acknowledge and Reset the Production Stop Alarm. The desired
sequence will have to be started/Restarted by the operator.
11.
Maintenance
The robust design of KrosFlo® Systems are intended for use with process equipment. As such, lab or
plant cleanliness and care are all that is needed to ensure quality operation when used in the
systems intended manner. The frame, cabinet, and pumps can be cleaned by manual wipe-down
using mild cleaning agents and/or warm water and a damp cloth or lab wipes. The HMI/Touchscreen
should be cleaned with computer screen cleaner and computer screen wipes. Cleaning products are
readily available from supply houses and the user must make sure the selected agent(s) are
acceptable with their facility and compliant with system materials of construction as specified in
. OEM manuals for major components are included in the documentation package for
reference.
An Electrical Schematic and Installation List of all major components (Process and Control Panel
items) is also provided should any service be required.
WARNING
–
System must be turned off when replacing fuses to prevent
electrical hazard. Any electrical work beyond the Electrical
Installation and fuse replacement should be performed by
trained personnel.
WARNING
–
Peristaltic pumps must be turned off when replacing either
tubing or pump heads to prevent crushing/pinching hazard.
