1. Remove rear protective cap and connect the supplied mini USB
cable into the Replay XD 1080 Mini USB port.
2. Plug the USB cable into your PC or Mac USB 2.0 port, or our USB
Wall Adapter accessory.
3. The green charging status LED at the rear of the Replay XD 1080
Mini will illuminate to tell you it’s charging. When the green LED
turns off, the battery is full and charging is complete
Note: Charging through the PC/Mac USB port will take approximately
twice as long as using the USB Wall Adapter or Car Adapter. It is not
recommended to record while charging through the PC/Mac USB port
as the Replay XD 1080 Mini uses approximately the same power draw
as the PC/Mac USB port, damage to the Replay XD 1080 Mini or your
computer may occur.
The Replay XD 1080 Mini will record for approx. 130 min. on a full charge
in optimal conditions. Extreme heat or cold can affect battery life.
SIDE VIEW
REAR VIEW
PC/MAC
CH A RG I N G
PC/MAC
MINI USB 2.0
CHARGE/SYNC
CABLE
Summary of Contents for 1080 Mini
Page 1: ...QUICK START GUIDE ...
