Repeatershop SignalPro W18-23, User Manual

Page: 21 / 28

Repeatershop.nl
Basecom b.v.
Ulgersmaweg 27a
9731BJ Groningen
I www.repeatershop.nl
E info@repeatershop.nl
T +31 (0)88 227 32 34
F +31 (0)88 227 32 33
Deutsche Bank 54.68.60.745
IBAN NL02 DEUT 0546 8607 45
KvK Groningen 02081942
BTW NL8208.00.533.B01
3G/4G-1800 Super High Gain
Fiberglass staafantenne
art. nr. A13513
Montage-instructies
Monteer de antenne met behulp van de bijgeleverde beugels aan de buis.
TECHNISCHE GEGEVENS
Frequentiebereik 1920-2170 MHz
Polarisatie Verticaal
VSWR ”
Versterking 9 dBi
PIM < -140 dBc (2 x 33 dBm carrier)
Ingangsweerstand Ÿ
Stralingshoek 360
0
Horizontaal, 11
0
Verticaal
Maximaal vermogen 100W
Blikseminslagbeveiliging DC Ground
Connector N-Female
Afmeting Ø 38 x 1000 mm
Gewicht 1 Kg
Reflector Copper
Behuizing Fiberglass grey
Windbestendigheid bestand tegen windsnelheden tot 210 km/h
Bedrijfstemperatuur -40
0
C – 55
0
C
Bevestiging Buis met een diameter van 38 – 52 mm
Beugel
Beugel
Montagebuis
Antenne
PREMIUM
LINE
2
1. The rated output power is reached, but the coverage is not enough or the signal in
specific areas isn’t improved:
Check whether the indoor antenna is installed correctly or not, try to change the
antenna position to improve coverage.
Check if it is necessary to adjust the direction of the indoor antenna.
Check whether it is necessary to add more indoor antennas since barriers block
the signal.
2. The rated output power is not reached.
Change the position or direction of the outdoor antenna to get a stronger
receiving signal and higher output power (Not necessarily to reach rated value
as long as the coverage is enough).
Check LCD display, if the reading gain is less than rated value and “ISO” is flashing,
it means the gain is reduced by ISO function for not having enough isolation.
Measures: The actions mentioned below are recommended to eliminate ISO problems
and increase the gain:
Adjust the antennas’ direction or location or enlarge the distance between
them.
Add the vertical or horizontal distance between outdoor antenna and indoor
antenna.
Use some barrier like walls to increase the isolation.
Change server antenna (indoor antenna can be changed to other antenna
type which has better directional pattern), also you can point outdoor antenna
and indoor antenna in the opposite direction.
Reduce the repeater’s downlink gain with a knob. Keep the uplink and downlink
attenuation value the same, then restart the repeater.
•
•
•
•
•
•
•
•
•
•