Repeatershop SignalPro W18-23, User Manual

Page: 22 / 28

Repeatershop.nl
Basecom b.v.
Ulgersmaweg 27a
9731BJ Groningen
I www.repeatershop.nl
E info@repeatershop.nl
T +31 (0)88 227 32 34
F +31 (0)88 227 32 33
Deutsche Bank 54.68.60.745
IBAN NL02 DEUT 0546 8607 45
KvK Groningen 02081942
BTW NL8208.00.533.B01
3G/4G-1800 Super High Gain
Fiberglass staafantenne
art. nr. A13513
Montage-instructies
Monteer de antenne met behulp van de bijgeleverde beugels aan de buis.
TECHNISCHE GEGEVENS
Frequentiebereik 1920-2170 MHz
Polarisatie Verticaal
VSWR ”
Versterking 9 dBi
PIM < -140 dBc (2 x 33 dBm carrier)
Ingangsweerstand Ÿ
Stralingshoek 360
0
Horizontaal, 11
0
Verticaal
Maximaal vermogen 100W
Blikseminslagbeveiliging DC Ground
Connector N-Female
Afmeting Ø 38 x 1000 mm
Gewicht 1 Kg
Reflector Copper
Behuizing Fiberglass grey
Windbestendigheid bestand tegen windsnelheden tot 210 km/h
Bedrijfstemperatuur -40
0
C – 55
0
C
Bevestiging Buis met een diameter van 38 – 52 mm
Beugel
Beugel
Montagebuis
Antenne
PREMIUM
LINE
22
More about “ISO” indication
ISO status indicates if the repeater has enough isolation between outdoor and
indoor antennas in order to avoid loop back or so-called self-oscillation. Thanks
to intelligent software, SignalPro is fully protected from interference with operator
mobile networks. “ISO” flashing on LCD display means that ISO function is working
great and self-oscillation has been eliminated.
LED Status Meaning SolutionMethods
ISO
status
Remain still
No loop back or
no self-oscillation
NO action is needed
Flashing but actual
gain is not more than
30dB and less than rated
gain
Slight loop back or
self-oscillation
NO action is needed
Flashing but actual gain
is more than 30dB Deep loop back or
self-oscillation
The actions mentioned below are
recommended:
1. Adjust the antennas’ directions
or locations to enlarge the distance
between them.
2. Enlarge the vertical or horizontal
distance between outdoor and indoor
antennas.
3. Use the barrier like walls to increase the
isolation.
4. Reduce the repeater’s gain by external
attenuator or replace with lower gain
antenna if the methods listed above
don’t work.