If your solar panel can’t charge the camera
anymore, try the following:
• Unplug and re-insert the charging cable.
Please ensure the connection between the
solar panel and camera is stable.
• Make sure that your Reolink Solar panel is
pointed toward the sun and is not obstructed
by trees, buildings, or other obstacles.
• Make sure that your camera is not working
in temperatures below 0°C (32°F) or above
45°C (113°F).
• If the problem goes on, contact Reolink
support.
Troubleshooting
Specifications
Notification of
Compliance
FCC Compliance Statement
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation. For more information, visit:
https://reolink.com/fcc-compliance-notice/.
Operating Temperature: -10° to 55° C (14° to
131° F)
Weather resistance: IP65 certified
weatherproof
Max Voltage: 6.0V
Max Current: 530mA
Max: 3.2W
Size: 132.5x197.5x13.2 mm
Cable Length: 4 Meters
Weight: 280g
Physical Parameters
Electrical Parameters:
General:
Stop charging the battery-
powered cameras
4
English
3
English
5. Connect the solar panel to the Reolink Argus 2
camera with the micro USB cable.
IMPORTANT NOTICE:
• Make sure that there is NO blocking on the
solar panel. The energy harvesting efficiency
drops drastically even when a small portion of
the solar panel is blocked.
• Please don’t install the solar panel completely
horizontally. Otherwise your solar panel might
accumulate dust and other debris easily. It’s
advised to install the solar panel angularly to
make it receive direct sunlight.
• Wipe the solar panel regularly to remove the
dust or debris.
Make sure the camera is
plugged in all the way and that
the waterproof wire cover
protects the interface between
the camera and the solar panel.
The Waterproof
Wire Cover
!