manualshive.com logo in svg

Rentokil Rat Riddance Connect, Instruction Manual, Page: 15 / 20

Share
Download
Rentokil Rat Riddance Connect Instruction Manual Download Page 15

15

Re-arm the trap within 1 minute after pressing the paddle. 

The Status LED will 

flash Blue

 for 10 seconds if it is armed correctly.

8. Arming the Trap

If the switch has not been checked before arming, the Status LED 

will 

flash yellow

 for 10 seconds to show it is successfully armed.

If the unit detects a faulty switch state during arming, the status LED 

will flash red to show an unsuccessful arming.

7. Testing the Paddle Switch

Test the paddle activation switch by 

pressing the paddle. 

If the switch is working 

effectively the Status LED 

will be 

yellow

 each time 

the paddle is pressed.

Note:

    Ensure trap is disarmed 

before pressing the paddle

Using the Interface

 

(Continued)

Each time the trap is armed, the connection status will be shown on the 

Connection LED for 1 hour.

Flashes 

Red

  

every 3 seconds

Flashes 

Yellow

  

every 3 seconds

Flashes 

Blue

    

every 3 seconds

Searching for Control 

Panel connection

Unit is trying to make a 

connection

Connection has been 

made

CONNECTION IDENTIFIER:

Summary of Contents for Rat Riddance Connect





















Reviews:

No comments