14
To force the radio to restart the connection process to the control
panel, hold the magnet over the device for between 5 and 10 seconds.
Only remove the magnet when the fl ashing
status LED has changed from blue to yellow.
To assess network signal strength and the number of control
panels required for a site, a Range Test can be performed.
Hold the magnet over the device
for 10 seconds, until the status
LED turns red
5. Radio Restart
6. Range Test
5 - 10 Secs
10 Secs
+
Flashes
Purple
every 3 seconds
Flashes
Red
every 3 seconds
Flashes
Yellow
every 3 seconds
Flashes
Blue
every 3 seconds
Unit is trying to make a connection
No signal
Weak Signal
Good Signal
LED IDENTIFIER:
Range test mode will automatically exit after 1 hour.
To exit range test mode manually, hold the service key over the device. The unit will
then restart and reconnect to the control panel and allow the device to be armed.
Using the Interface
(Continued)