Renson Lapure, User Manual

Page: 86 / 152

86
Moving the end points of
the screen roof (with RTS
control)
A. Go to the endpoint (upper or lower)
which you want to move.
B.
Press more than 5 sec. on the UP-
and DOWN-button till the Fixscreen
makes a short movement.
C. Choose the new (upper or lower)
endpoint by pressing the UP- and/or
DOWNbutton.
D. Press more than 2 sec. on the MY-but-
ton till the Fixscreen makes a short
movement.
Test the new endpoint.
Copy Telis hand-held
transmitter programming
to another Telis hand-held
transmitter
A.
Select the channel you wish to copy
on Telis 1 (bladed roof, fixscreen, LED,
etc.).
B. Press longer than 3 sec. on the PROG
button at the back of the Telis 1 re-
mote until the blades move back and
forth, the fixscreen shortly moves up
and down or the LED flashes.
C. Select the desired channel on Telis 2
to which you want to copy.
D. Press briefly on the PROG button on
the rear of the Telis 2 remote.
Select personal position of
the screen roof
A. Place the bottom bar in the desired
position.
B. Press the MY-key until the bottom bar
briefly goes up and down as confirma-
tion.
C. The next time you press on the MY-
key, the fabric will automatically move
to this position.
0,5 sec.
ENDPOINT NEW
ENDPOINT
> 5 sec. > 2 sec.
0,5 sec.
ENDPOINT
TEST
NEW
ENDPOINT
> 5 sec. > 2 sec.
A
E
B
C D
A B
C D
0,5 sec.
ENDPOINT NEW
ENDPOINT
> 5 sec. > 2 sec.
0,5 sec.
ENDPOINT
TEST
NEW
ENDPOINT
> 5 sec. > 2 sec.
A
E
B
C D
A B
C D
0,5 sec.
ENDPOINT NEW
ENDPOINT
> 5 sec. > 2 sec.
0,5 sec.
ENDPOINT
TEST
NEW
ENDPOINT
> 5 sec. > 2 sec.
A
E
B C D
A B
C D
0,5 sec.
ENDPOINT NEW
ENDPOINT
> 5 sec. > 2 sec.
0,5 sec.
ENDPOINT
TEST
NEW
ENDPOINT
> 5 sec. > 2 sec.
A
E
B C D
A B
C D
> 2 sec 0,5 sec > 2 sec 0,5 sec
> 2 sec 0,5 sec
TELIS 1
TELIS 2
TELIS 1
> 3 sec.
TELIS 2
0,5 sec.
TELIS 1
TELIS 2
TELIS 1
> 3 sec.
TELIS 2
0,5 sec.
TELIS 1
TELIS 2
TELIS 1
> 3 sec.
TELIS 2
0,5 sec.
TELIS 1
TELIS 2
TELIS 1
> 3 sec.
TELIS 2
0,5 sec.
A
A
A
C
C
C
B
B
B
D
D
ENDPOINT
NEW
ENDPOINT