Installation Guide RN5000US
31
Table 5-1 Mounting Items
Item
Description
1
Concrete / block wall
2
Expansion cylinder
3
Bracket
4
Washer
5
Spring washer
6
Hexagonal nut
Mounting the expansion screws
:
Three fasteners are required to secure the wall mounting bracket to a wall: Two
fasteners along the top of bracket using the center holes on each side (centerline
spacing of 252mm) and a third fastener at the centerline of the bottom of the bracket
(Expansion screws are provided however it is installers responsibility fasteners are
appropriate for wall material.)
Ensure that all fasteners are well secured.
4.3.2 Mounting the Digiwatts Unit to the Wall Bracket
Use the following procedure to mount the Digiwatts unit once wall bracket is secured to
the wall.
1) Carefully hook the slots on the rear of the Digiwatts case onto corresponding
vertical tabs of the wall bracket.
Figure 4-5 Attach the Inverter to Bracket
