![Renogy RNG-100D Installation Manual Download Page 5](http://html1.mh-extra.com/html/renogy/rng-100d/rng-100d_installation-manual_1442982005.webp)
04
Product Identification
Renogy modules have been qualified for Application Class A. Modules qualified for safety
through IEC 61140 and within this application class are considered to meet the requirements
for Safety Class II. Modules rated under this class should be used in systems operating at a
voltage above 50 VDC or power above 240 W, where general contact access is anticipated.
Each module has two labels on its rear side providing the following information:
Fire Resistance Safety Class C
When the fire rating is dependent on a specific mounting structure, specific spacing, or
specific means or attachment to the roof or structure, details of the specific parameter or
parameters should be included in the instructions.
Nameplate: describes the product type; rated power, rated current, rated voltage, open
circuit voltage, short circuit current, all as measured under standard test conditions; weight,
dimension etc.
Do not remove any label. If the label is removed the product warranty will no longer be
honored by Renogy.
Bar code: each individual module has a unique serial number.
Module Application:Class A
RNG-xxD
This module produces electricity when exposed to light.
Module Type:
Max Power at STC (P
max
)
Open-Circuit Voltage (V
oc
)
Optimum Operating Voltage (V
mp
)
Optimum Operating Current (I
mp
)
Temp Coefficient of P
max
Temp Coefficient of V
oc
Temp Coefficient of I
sc
Max System Voltage
Max Series Fuse Size Rating
Fire Rating
Weight
Dimensions
STC
W
V
V
A
x %/℃
x %/℃
x %/℃
600VDC (UL)
xx A
Class C
xx kg / xx lbs
xx
x
xx
x
xx mm / xx
x
xx
x
xx in
Irradiance 1000 W/m
2
, T = 25℃, AM=1.5
WARNING:
Please follow all applicable electrical safety precautions.
Only qualified personnel should install or perform maintenace work
on these modules.
Be ware of dangerously high DC voltages when connecting modules.
Do not damage or scratch the rear surface of the module.
Follow your battery manufacturer’s recommendation.
Short-Circuit Current (I
sc
)
A
Safety
tested
Producti
on
moni
tor
ed
IEC
617
30
IEC 61215
Photo
voltaics