13
Wiring
Type
Ratings
PV Wire
PV1-F1x4.0 mm
2
Rated Voltage: 1800VDC
-40ׄ°C Up to 120°C
Rated Voltage:1000VDC
Rated Current: 30A
-40°F to 194°F
Rated Voltage: 1000VDC Up to 15A
LJQ-1
PV-JM801
Solar Connectors
Junction Box
Means to identify each distinct PV connector manufacturer’s product - such as a picture or
illustration, unique physical features, markings, company logos, etc, and
Allowable mating connector manufacturer and model number(s) listed for each distinct
cable connector manufacturer’s product(s), as well as contact information and/or website of
the PV connector manufacturer.
Keep connectors dry and clean and ensure that caps are tightly sealed before connecting
modules.
Faulty connections can result in electrical shock so make sure to fasten all connections
securely.
Renogy modules can be installed in landscape or portrait orientation. Make sure that the
proper distance between the panels and the surface allows for air circulation.
Cables and Wiring
Renogy modules are equipped with two (2) stranded, PV-rated, output solar connector
cables. The positive connector is a male connector and the negative connector is a female
connector. These wires by themselves are rated for series connections, but could be adapted
to hold parallel connections with an extra component such as a combiner box or a solar
connector adaptor for parallel strings. Renogy recommends that only sunlight resistant cables
be used with the minimum wire size being 4mm2 in diameter.
Modules equipped with PV wiring connectors that comply with the Standard for Connectors
for Use in Photovoltaic Systems, UL 6703, shall have the specific allowable mating connector
manufacturer(s) and model number(s) listed, as well as contact information and/or website of
the PV connector manufacturer. If a specific module product is available with multiple PV
wiring connectors from various manufacturers, then the following shall be included:
