14
Off-Grid Living
COMMUNICA
TION
AC OUTPUT
20A
SOLAR INPUT
2
+
+
EXPANSION
STEP-5.4
STEP-5.5
I/ON
O/OFF
I/ON
O/OFF
AC OUTPUT
20A
AC INPUT
20A
AC/INV
SET
UP
DOWN
ENT
CHARGE
FAULT
SOLAR
1
SOLAR
2
BATTER
Y
SURCE
AC OUTPU
T 20A
AC OUTPU
T 30A
AC OUTPU
T 30A
PROTEC
TION
BLUET
OOTH
POWER
LINK
BT-2
Bluetoot
h Module
STEP-5.6
Connect the plug end of the
Adapter Cable to the 30A AC
Outlet of LYCAN.
Replace the cover to the
AC Load Center. Push the
switches toward the center of
the AC Load Center to close
all the AC Circuit Breakers.
Loosen the captive screws to
open the Viewing Window.
STEP-5.7
AC OUTPUT 20A
AC OUTPUT 30A
AC INPUT
CHARGE
FAULT
ENT
DOWN
UP
SET
AC/INV
CHARGING
LI
INPUT
100%
25%
CHARGE
FAULT
ENT
DOWN
UP
SET
AC/INV
CHARGING
LI
INPUT
BYPASS
100%
25%
STEP-5.8
Powered by Bypass AC
Powered by Batteries
Push the switch up to close
the 30A AC Output Circuit
Breaker.
The Solar Inverter Charger AC/INV Indicator lights up yellow
when the appliances are powered by bypass AC.
The Solar Inverter Charger AC/INV Indicator flashes yellow when
the appliances are powered by the batteries.
z
Please close the Viewing Window and tighten the captive screws after completing the steps
above.
z
The AC Circuit Breakers and the appliances MUST be rated at 120VAC.
z
The continuous loads shall not exceed 24A, and the noncontinuous loads shall not exceed 30A.
z
When the appliances are powered by bypass AC, the continuous loads shall not exceed 16A, and
the noncontinuous loads shall not exceed 20A.
Powering Appliances
