Rennsteig RAUCUT I, Owner'S Manual, Page: 13 / 16

Owner’s Manual Stripping Tool for Polymeric Optical Fiber - RAUCUT I
Rev.: 2016-04-06 5 / 8
EN
8. Close the handles of the RAUCUT I
9. Hold bundled cable
10. Cut into the insulation by pulling the
bundled cable at a steady pace through
the guide of the RAUCUT I up to the
second marking
11. Open the RAUCUT I by squeezing the
handles together
12. Lift the processed bundled cable sideways
out of the tool
13. Use a pair of side cutters to remove the
leftover shaving of the bundled cable