background image

IMPORTANT WEATHER RESISTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions 

5. Clean only with dry cloth.

6. Do not block any ventilation openings.  Install in accordance with 

the manufacturer’s instructions.

7. Do not install near any heat sources such as radiators, heat 

registers, stoves, or other apparatus (including amplifiers) that 

produce heat.

8. Means of disconnection of the unit from the AC mains shall be 

specified, including the electrical ratings of the disconnect device.  

9. Only use attachments/accessories specified by the manufacturer. 

10. Disconnect this apparatus during lightning storms or when 

unused for long periods of time.

11. Refer all servicing to qualified service personnel. Servicing is 

required when the apparatus has been damaged in any way, such 

as power-supply cord or plug is damaged, liquid has been spilled 

or objects have fallen into the apparatus, the apparatus has been 

exposed to rain or moisture, does not operate normally, or has been 

dropped.

THE INSTALLATION SHALL BE CARRIED OUT IN 
ACCORDANCE WITH ALL APPLICABLE INSTALLATION 
RULES IN COMPLIANCE WITH THE NATIONAL 
ELECTRICAL CODE, ANSI/NFPA 70 AND CANADIAN 
ELECTRICAL CODE PART I.

“CAUTION:  THESE SERVICING INSTRUCTIONS ARE 
FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY.  
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT 
PERFORM ANY SERVICING OTHER THAN THAT 
CONTAINED IN THE OPERATING INSTRUCTIONS UN-
LESS YOU ARE QUALIFIED TO DO SO”.

CAUTION

To reiterate the above warnings: servicing instructions are for

use by qualified personnel only. To avoid electric shock, do

not perform any servicing other than that contained in the Ope-

ration Instructions unless you are qualified to do so.  Refer all

servicing to qualified personnel.

Eindrigliche Warnung:  Wartungsvorschriften dienen nur der

Benutzung durch qualifizieres Personal.  Zur Vermeidung eines

elektrischen Schlages keine anderen als die in den Betriebsvor-

schriften beschriebenen Wartungsarbeiten ausführen, es sei denn 

Sie sind dafür qualifiziert.  Wartungsarbeiten auszuführen.

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the use to the presence of uninsulated

"Dangerous Voltage" within the product's en-

closure that may be of sufficient magnitude

to constitute a risk of electric shock to hu-

mans.

The exclamanation point, within an equilateral

presence of important operating and mainte-

nance (servicing) instructions in the literature

accompanying the product.

VORSICHT

RISK OF ELECTRONIC SHOCK:

OPEN ONLY IF QUALIFIED AS

SERVICE PERSONNEL

GEFAHR EINES ELEKTRISCHEN SCHLAGES:

NUR VON QUALIFIZIEREM WARTUNGSPERSONAL

ZU ÖFFNEN

Der Blitz mit nach untenzielendem Pfeil in

einem gleichseitigen Dreieck weist den

Benutzer auf das Vorhandensein einer

unisolierten, "gefährlichen Spannung" im

Gehäuse hin, die stark genug sein kann, einer

Person einen gefährlichen elektrischen Schlag

zu versetzen.

Das Ausrufezeichen in einem gleichseitigen

Dreieck weist den Benutzer auf wichtige

Betriebs- und Wartungsvorschriften in den

beiliegenden Unterlagen des Gerätes hin.

Erklärung der graphischen Symbole

Explanation of Graphical Symbols

Summary of Contents for IC Live FRO Series









Reviews: