b) Menu
Each mode has its own menu. To access a menu, enable the corresponding mode.
The system menu can be accessed in any mode.
Using the menu
If necessary, stop the video recording or video playback. The camera must be in
standby mode.
• Use the MODE (2) button to select the mode whose menu you wish to access.
• Press the MENU button (7) to display the menu for the selected mode.
• Press the MENU button (7) again to display the system menu.
• Press the (5) or (8) buttons to navigate in the menu or change settings.
• Press the R/OK button (4) to select a menu item or confirm your entry.
• Press the MENU button (7) to go back to the previous menu. To exit the menu, press the
MENU key (7) repeatedly until the selected mode appears on the display.
Video menu
Resolution
Configures the resolution and frame rate settings
Loop recording
Sets the length of recording sequences.
The camera records video in sequences. The oldest
recording is overwritten when the memory card is full.
WDR
Wide Dynamic Range
Improves image quality when there are strong contrasts
and challenging lighting scenarios.
Exposure
Sets the exposure compensation
Motion Detection
Automatically controls video recording (start/stop) via
motion detection
Record Audio
Enables/disables audio recording
Date Stamp
Enables/disables the time and date stamp
Gravity sensing
Automatically write-protects video recordings when an
accident is detected.
Sets the sensitivity of the acceleration sensor.
12
