45
One channel does not work:
• A cinch cable has come loose from the CD player or the amplifier input or the cable is defective.
• A speaker cable has come loose at the amplifier.
A drone is audible:
• The cinch cable is defective.
The remote control does not work:
• The batteries are flat. Replace them with new ones.
• The batteries are inserted incorrectly.
• Point the front of the IR remote control with the integrated LED at the IR receiver on the front of the CD
player.
• The range of the IR remote control is up to 8 m.
The CD player does not react to pushing buttons (neither at the device nor via the remote control):
• Switch off the CD player with the on/off switch and then on again after several seconds.
18. Technical Data
a) CD-Player
Operating voltage ........................................
220 - 240 V/AC, 50 Hz
Power consumption.....................................
8 W
Output voltage ..............................................2 VRMS
Total harmonic distortion ............................0,08 %
Frequency response ....................................
20 - 20000 Hz (+/-3 dB)
S/N ratio.........................................................90 dB(A)
Channel separation......................................58 dB
Dimensions....................................................430 x 70 x 225 mm
Weight
............................................................2,75 kg
b) IR Remote Control
Operating voltage.........................................
3 V/DC; two batteries of type AAA/micro
Range .............................................................up to 8 m
